Automotive Frame For Car 2K Plastic Injection Mold And Parts

Short Description:

This is a plastic fitting for a seal in auto parts. A car has tens of thousands of spare parts, many of which are used to seal solutions. This is one of them. It is made of a two-color mold, the material is SAN+TPE – 60 Shore A, the weight is about 45g, and the surface is polished. The overall color is transparent and white. The key function of this product is not to completely seal the solution, but to seal it structurally. So there are two round holes in the middle. Auto parts have always been the main product type of our company. Over the years, we have directly or indirectly cooperated with many auto parts brands, such as Mercedes-Benz BMW, Volkswagen, Maserati and so on. Meet the needs of different customers.

Product Detail

Product Tags

Your Ideas

Part material SAN+TPE - 60 ShoreA
Part weight 45g
Surface finish Polish
Color Transparency+white

Your Ideas

img (1)

Mold Flow Analysis

img (8)

Mold Design

img (9)
img (2)

Mold Manufacturing

Part name Frame
Mold material 2343ESR
Mold lift time(shots) 1000000
Cavity 1+1
Hot or Cold Runner Hot runner
Mold size 574X760X607mm
Mold weight 1650 KG
Injection Machine Parameter 450T
Cycle time 59s
Mold standard Hasco 
img (4)
img (3)

Trial Production

Realizing your Ideas

img (6)
img (7)

Basic Information

Brand Moldie
Mold Base LKM, HASCO, DME or your requirement
Mold Material 45#, P20, H13, 718, 1.2344, 1.2738 and so on
Standard HASCO, DME, MISUMI, PUNCH and so on
Product Material PC/ABS, ABS, PC, PVC, PA66, POM or other you want
Runner Cold/Hot Runner
Gate Type Side gate, Sub gate, Pin point gate, Edge gate etc
Mould Weight 50kg-15Ton
Injection Machine Type 80-1500Ton
Standard for Product Appearance for graining MT(Mold Tech), YS, HN Series
The Way of Color Contrast for Plastic RAL PANTONE
Certificated ISO 9001:2015 Certificated, SGS Certificated

  • Previous:
  • Next:

  • Write your message here and send it to us