PA6 Black Mirror Polish Of Electronic Plastic Injection Mold

Short Description:

In electronic products, plastic parts are very common. This is a plastic fitting in an electronic appliance. It is made of nylon material, completely black covered, weighs about 60g, mirror polished standard. It can be seen that the product has a tubular structure, and the bottom has different levels of lines for assembly with other accessories. This product has a relatively stable structure and high strength. Although the material without glass fiber has high strength, the natural nylon material is also a relatively hard material, which can achieve better hardness performance. The mold cavity core is made of H13 material. Under the condition of good daily maintenance, the life of the mold can be guaranteed to reach more than one million. Of course, if the nylon and glass fiber material is often used, the corrosion is too strong, and the life will be reduced.

Product Detail

Product Tags

Your Ideas

img (1)
img (2)
Part material PA6
Part weight 60g
Surface finish Mirror polish
Color Black

Mold Design

212 (2)
212 (1)

Mold Manufacturing

Part name Minikart-tube
Mold material H13
Mold lift time(shots) 1000000
Cavity 1
Hot or Cold Runner Cold
Mold size 300*250*420 mm
Mold weight 240 KG
Injection Machine Parameter HaiTian -160T
Cycle time 45s
Mold standard DME
img (2)
img (3)
img (4)
img (5)
img (1)

Trial Production

Realizing your Ideas

21212 (2)
21212 (1)

Basic Information

Brand Moldie
Mold Base LKM, HASCO, DME or your requirement
Mold Material 45#, P20, H13, 718, 1.2344, 1.2738 and so on
Standard HASCO, DME, MISUMI, PUNCH and so on
Product Material PC/ABS, ABS, PC, PVC, PA66, POM or other you want
Runner Cold/Hot Runner
Gate Type Side gate, Sub gate, Pin point gate, Edge gate etc
Mould Weight 50kg-15Ton
Injection Machine Type 80-1500Ton
Standard for Product Appearance for graining MT(Mold Tech), YS, HN Series
The Way of Color Contrast for Plastic RAL PANTONE
Certificated ISO 9001:2015 Certificated, SGS Certificated

  • Previous:
  • Next:

  • Write your message here and send it to us