Loudspeaker of injection molded parts for Lamborghini

Short Description:

This is a horn plastic fitting for a Lamborghini brand car. It is resistant to high temperature, strong hardness, anti-vibration, and can work normally under strong noise. The mold is made of H13 core material, which has strong corrosion resistance. Under the condition of daily maintenance, the life of the mold can reach one million.


1. When washing the car, remember to prevent the horn from getting wet, and dry the horn with an air gun as soon as possible.

2. Try not to always press the horn for a long time, which will easily cause premature ablation of the horn contacts.

3. If the speaker fails, try to seek the help of professional maintenance technicians. Do not blindly replace the speaker, which will easily cause unnecessary waste.

Product Detail

Product Tags

Your Ideas

img (2)
img (1)
Part material PA6+GF30
Part weight 50
Surface finish Texture
Color Black

Mold Design

img (2)
img (3)
img (4)
img (1)

Mold Manufacturing

Part name Loudspeaker for Lamborghini
Mold material H13
Mold lift time(shots) 100W
Cavity 1
Hot or Cold Runner Cold
Mold size 300X400X400 mm
Mold weight 5500KG
Injection Machine Parameter  HT 200
Cycle time 40s
Mold standard HASCO 
zhu (4)
zhu (3)
zhu (1)

Trial Production

Realizing your Ideas

img (1)
img (2)
img (3)

Basic Information

Brand Moldie
Mold Base LKM, HASCO, DME or your requirement
Mold Material 45#, P20, H13, 718, 1.2344, 1.2738 and so on
Standard HASCO, DME, MISUMI, PUNCH and so on
Product Material PC/ABS, ABS, PC, PVC, PA66, POM or other you want
Runner Cold/Hot Runner
Gate Type Side gate, Sub gate, Pin point gate, Edge gate etc
Mould Weight 50kg-15Ton
Injection Machine Type 80-1500Ton
Standard for Product Appearance for graining MT(Mold Tech), YS, HN Series
The Way of Color Contrast for Plastic RAL PANTONE
Certificated ISO 9001:2015 Certificated, SGS Certificated

  • Previous:
  • Next:

  • Write your message here and send it to us